Welcome to the Guide for installing WiZ accessories! WiZ smart system offers different accessories assisting you to build up your perfect smart lighting experience.

 

Assessories in WiZ system

Adding a WiZmote/ Smart button in a home 

To add a control accessory such as a WiZmote or a Smart button in a home, start by making sure you have installed at least one light, dimmer switch or smart plug in the app, and that this device is currently powered on and connected. WiZ accessories are detected by the devices near them, which is why at least one device needs to be present and online.

  • On the home screen of the app, tap on the + button in the top right corner
  • Among the list of products, select WiZmote or Portable button, depending on the accessory you are adding.
  • Choose the room in which you want to install your accessory. Make sure that room has at least one connected device. If you want your accessory to control lights across multiple rooms, this can be set up at a later stage
  • Hit the start button
  • Press a few times on the ON button of the accessory, until the app confirms that it has been found
  • Done!

More instructions on control accessories: 

 

Adding an NFC tag in a home 

Congrats on getting WiZ NFC tags! Adding a tag to your home is rather simple. Please follow the steps below.

  1. Open the WiZ app and locate the + button in the top right corner of the Home tab
  2. Tap on the +, then select "NFC tag" as device type
  3. Tap the NFC tag onto the NFC reader of your phone
  4. Give your tag a name and icon
  5. Select what action should be triggered when this tag is scanned
  6. All done!

Notes:

  • Only "owners" of the home are allowed to add NFC tags. If you cannot find the + button or face an error message, please make sure that you have the right permissions
  • You can find the list of NFC tags already installed in Settings > Accessories

More instructions on NFC tags: Accessories: NFC tags

 

Adding a motion sensor to a room 

To add a PIR motion in a room, start by making sure you have installed at least one light, dimmer switch or smart plug in the app, and that this device is currently powered on and connected. WiZ accessories are detected by the nearby devices, which is why at least one device needs to be present and online.

  • On the home screen of the app, tap the + button in the top right corner
  • Among the list of products, select Motion sensor
  • Choose the room in which you want to install your motion sensor. Make sure that room has at least one connected device
  • Hit the start button
  • Make sure you have fresh batteries in the sensor, then press the button located on the side of the sensor, and keep the sensor close to your lights
  • Wait a little, until the app confirms the sensor has been found. Give it a name if you want
  • Done!

More instructions on motion sensor: Accessories: Motion sensor (PIR)

 

Adding a dial switch in a home

To add a dial switch in a home, start by making sure you have installed at least one light, dimmer switch or smart plug in the app, and that this device is currently powered on and connected. WiZ accessories are detected by the nearby devices, which is why at least one device needs to be present and online.

  • On the home screen of the app, tap the + button in the top right corner
  • Among the list of products, select Wall controller
  • Choose the room in which you want to install your switch. Make sure that room has at least one connected device. If you want your switch to control lights across multiple rooms, this can be set up at a later stage
  • Hit the start button
  • Short press a few times on the center button of the switch, until the app confirms the switch has been added
  • Done!

Note: your switch might occasionally appear as "wall controller" in the system. This is a known issue that will be addressed soon. No worries, your button will work perfectly fine regardless.

More instructions on motion sensor: Accessories: Dial switch